Having a New Boiler Installed
If you’re having a new boiler fitted, you might be a bit apprehensive about what is involved and the levels of disruption to expect. Firstly, never attempt a boiler installation on your own. It is a job that can only be completed by a gas safe registered engineer. Having an idea of what to expect can help you to prepare yourself and your home for the period of installation.
An engineer will most likely pay you a visit before the installation date so as to look at the area the boiler will be placed, see if there are better alternatives or check that everything is ok to continue. They will examine the existing boiler’s location, number of radiators in the home, water pressure levels, flue position and the number of bathrooms. This is their chance to advise you of the best place for the boiler to be positioned and how it will be installed. This is also a good time to discuss payment plans and set a date for the work to be carried out.
You are probably wondering how long the work will take? As every household is different, it’s difficult to answer this question. A lot depends on the amount of refitting required and the how long it takes to remove the existing system. A straightforward installation is usually completed within a day but should take no more than two, unless a major refit is also required.
You don’t need to stay at home the whole day, as long as you’re back in time for the engineer to give you some instructions on how to use your new boiler. Before the work starts, the gas engineer will lay down dust sheets and protectors for any nearby carpet to limit any mess and dust.
After the installation is complete, your engineer may also need to perform a power flush after setting up the new system. This is a process that is used to rid the pipes of any additional debris inside the system from the installation of the new boiler. For Gloucester Boiler Installation, visit http://www.hprservicesltd.com/gloucester-boilers/boiler-installation-gloucester/
During the installation, your gas safe registered engineer will ensure that all components are connected correctly and safely attached to the gas line. They will then go through the important safety information with you and show you how to use your new boiler in more detail. The engineer will clean up their workspace and get rid of waste, including your old boiler if you had a boiler replacement.
Remember that installing a gas appliance must only be carried out by a certified and qualified gas safe engineer. Never attempt to fix or replace such appliances as a DIY project.